HILLMAN 838620
Shaft collars are commonly used as mechanical stops, locating components and/or bearing faces within mechanical systems. Shaft collars create a tight fit and greater holding power without the damage normally caused by set screws alone.
| Bore Diameter | : | 1/2 in |
| Finish | : | Zinc-Plated |
| Outside Diameter | : | 1 in |
| Additional Information | : | 7/16 in THK Dimensions |
- Great for power transmission assemblies - recommended for use in applications involving motors or gearboxes
- Versatile - effective on both hard and soft-material shafts
- Removable and reusable - easily installed where major assembly or disassembly would otherwise be required
- Corrosion-resistant finish - zinc-plating offers moderate protection against rust and corrosion
- Part of the Hillman deep drawer program
- Five (5) collars per sellable unit